American Standard Home Additions & ADU in Las Vegas, NV

American Standard Home Additions & ADU: The Las Vegas Owner’s Guide

Groundwork Construction Co. of Las Vegas stocks and installs American Standard-compatible fixtures, rough-in components, and finish materials for home additions and ADU projects, with most Las Vegas jobs running $45,000-$130,000 for additions and $90,000-$220,000 for detached ADUs. We carry the critical American Standard SKUs that other contractors special-order, meaning your project doesn’t stall waiting on a toilet flange or a rough-in valve. Most homeowners discover their American Standard part has failed when a bathroom rough-in leaks during pressure testing, a wall-hung carrier won’t seat level, or a pre-fab shower unit arrives with a cracked drain assembly - any of which can push your addition timeline back by weeks if the replacement isn’t on hand.

Call (855) 951-4361

Which American Standard Models This Applies To

American Standard’s residential product lines for additions and ADUs break into three tiers we work with regularly: the Cadet Pro and Champion Pro series for standard rough-ins, the Studio S and Townsend collections for mid-grade finishes, and the DXV line for custom applications. The critical compatibility point most Las Vegas homeowners miss is the difference between the Champion 4’s 4-inch flush valve and the standard 3-inch Cadet valve - they’re not interchangeable, and we’ve seen additions in Summerlin where a contractor installed the wrong carrier, creating a 2-inch offset that required reopening a finished wall.

To identify your part, check the tank stamp (inside, near the water line) for a four-digit model prefix, or the rough-in box for a part number beginning with 73- or 74-. OEM American Standard parts carry a 10-year warranty on vitreous china and 5 years on mechanical components, but quality aftermarket equivalents from Fluidmaster and Korky often match spec at lower cost for valves and seals. We stock both on our Las Vegas trucks because the desert hard water here chews through rubber seals faster than the national average, and waiting three days for an OEM flapper isn’t an option when your inspector is scheduled.

Signs Your American Standard Home Additions & ADU Is Failing

• Pressure test failure at 40 PSI or above. American Standard rough-in valves use a ceramic disc cartridge that can crack if over-torqued during installation. In Las Vegas, we see this most often in ADUs where the original plumber used channel locks instead of a smooth-jaw wrench, micro-fracturing the cartridge seat. The leak won’t show at static pressure but opens under flow.
• Wall-hung toilet carrier won’t hold level after 72 hours. The Glenwall and Tofino carriers require exact bolt torque - 45 lb-ft, no more - and the steel frame can creep if the concrete pan wasn’t poured to American Standard’s 2-degree forward pitch spec. We’ve corrected three of these in the past year in Henderson alone, all from the same issue.
• Shower base drain threads strip during final connection. American Standard’s pre-fab shower units ship with ABS or PVC drain bodies depending on production run, and the thread pitch differs. A contractor who assumes they’re all the same will cross-thread the connection, destroying the base. This is a full-unit replacement, not a parts fix.
• Champion 4 flush valve hisses continuously after fill. The silicone seal on this valve degrades faster in Las Vegas’s hard water (12-18 grains typical) than the national 3-5 grain average. The seal looks intact but micro-pits, causing a slow leak that cycles the fill valve every 10-15 minutes.
• Studio S faucet drips from the handle base, not the spout. This indicates cartridge O-ring failure, not cartridge failure. The O-ring set costs $4; a full cartridge replacement runs $85. Knowing the difference saves you the cost of unnecessary parts and the labor to swap them.

Replacement Cost & What’s Included

American Standard component replacement within a home addition or ADU project in Las Vegas typically falls within our standard addition pricing of $45,000-$130,000, with specific fixture swaps running $200-$800 for accessible rough-ins and $1,200-$3,500 when wall or floor demolition is required. What drives the range is three things: whether we can access the part through a removable panel, whether the original installation followed American Standard’s rough-in dimensions (if not, we rebuild to spec), and whether the failure damaged adjacent materials.

Every replacement includes the part, installation to manufacturer spec, pressure testing, and our 730-Day Done Right Promise on the workmanship. We don’t markup parts - you see our supplier invoice - and we quote upfront pricing, no surprises, before any work begins. The 730-Day Done Right Promise means if that Champion valve seal weeps in month 14 because we didn’t seat it clean, we come back and make it right.

DIY or Call Us?

There’s a clear line between what you can safely check and where you need a licensed plumber with addition-specific experience. You can verify the model number, confirm the water is shut off at the street (not just the angle stop), and photograph the failure for our team to diagnose before we arrive. What you shouldn’t attempt: pressure testing a rough-in without a calibrated gauge, torquing a wall-hung carrier without a beam clamp to distribute load, or cutting into a wet wall to access a valve without verifying electrical and structural routing.

We’ve been called to fix DIY attempts in Las Vegas where a homeowner cracked a fire-rated partition chasing a leak, turning a $400 valve swap into a $6,000 code-compliance rebuild. The ground doesn’t lie, and neither do we - if it’s beyond your tools and permits, call (855) 951-4361. A live person answers 24/7, and we’ll get a background-checked, uniformed technician out to assess it.

FAQs