IKO Windows & Doors in Las Vegas, NV

IKO Windows & Doors: The Las Vegas Owner’s Guide

Groundwork Construction Co. of Las Vegas stocks and installs IKO-compatible windows and doors across the valley, with most replacement projects running $4,500-$15,000 for standard window replacement and $8,000-$25,000 for impact-rated installations. We carry IKO-matched hardware, weatherstripping, and sash components on our trucks, and most Las Vegas homeowners get same-day service when they call (855) 951-4361. You’ll know something’s wrong when you feel that draft against your neck in January, or when your energy bill jumps $80 in July because the seal gave out somewhere around year twelve.

Call (855) 951-4361

Which IKO Models This Applies To

IKO doesn’t manufacture windows or doors directly, they produce the building envelope materials that integrate with them. What Las Vegas homeowners call “IKO windows” are typically IKO-protected openings using Andersen, Pella, or Marvin units installed beneath IKO roof and wall systems. The confusion matters because the part you actually need depends on which window series sits in that opening.

Check the edge of the sash or the spacer bar between panes for the real manufacturer’s label. Andersen units will show a manufacturing date and series number (100, 200, 400, or A-Series). Pella marks their Impervia, 350, or Architect Series. If you’re seeing moisture between panes on a south- or west-facing wall in Summerlin or Henderson, you’re likely dealing with a failed insulated glass unit in an Andersen 400 Series or Pella 350, both of which we stock seals and replacement sashes for.

We source OEM hardware where it matters for warranty transferability, and use quality aftermarket equivalents for weatherstripping and balance systems where the performance spec matches. The ground doesn’t lie, and neither do we: sometimes the aftermarket part is identical metal from the same foundry, just without the brand markup.

Signs Your IKO Windows & Doors Is Failing

• Fog or moisture between glass panes. The desiccant inside the insulated glass unit has saturated, and the seal has failed. In Las Vegas, this accelerates on elevations above 2,500 feet and on walls that catch afternoon sun; we’ve replaced dozens in the foothills of Summerlin where thermal cycling is brutal.
• Sash won’t stay open or slams shut unexpectedly. The balance system, either coil or block-and-tackle, has worn out or the spring has lost tension. On older Andersen double-hungs, this is almost always the balance shoe or the pivot bar.
• Visible gaps around the frame or operable sash. Compression weatherstripping has flattened or torn, or the sill track has warped from heat exposure. In Las Vegas, black or dark-colored vinyl frames on west walls can hit 160°F surface temperature, accelerating degradation.
• Difficulty locking or unlocking. The multipoint lock mechanism has corroded, or the keeper has shifted as the frame settled. This is common in homes built during the 2004-2007 boom where rapid framing dry-out caused subtle movement.
• Water intrusion during rare heavy rains. Weep holes are clogged, or the sill pan flashing was never properly integrated with the IKO water management system. In Las Vegas, dust accumulation in weep channels is the usual culprit, but the fix sometimes requires pulling trim to inspect the pan.

Replacement Cost & What’s Included

What drives the range: unit size, whether the opening needs reframing, second-story access, and whether we’re matching existing trim profiles in older Las Vegas neighborhoods like Rancho Circle or the historic district. Our upfront pricing means the number you see is the number you pay. Every window and door project carries our 730-Day Done Right Promise - if it’s not done right, we make it right.

DIY or Call Us?

There’s a honest line here, and we’ll tell you exactly where it sits. A homeowner with a screwdriver and patience can clear weep holes, lubricate tracks with silicone spray, or replace snap-in weatherstripping. Those are safe, low-stakes fixes.

Where DIY goes wrong: removing a sash with a failed balance puts you at risk of a sudden drop that can crush fingers or break the glass. Reglazing an IGU requires proper setting blocks, capillary tubes, and tempering knowledge - get it wrong and you’ve got a vacuum failure in six months. And anything involving ladder work on a second-story Las Vegas home in July is a heat-stroke risk before it’s a construction risk.

We carry Andersen, Pella, and Marvin balance systems, sash kits, and IGU sizes on our trucks. Most single-window repairs in Las Vegas are completed in one visit. Call (855) 951-4361 - a live person answers, 24/7.

FAQs