Tub-to-Shower Conversion in Henderson, NV: What It Costs and How Long It Takes
A tub-to-shower conversion in Henderson runs $3,500-$10,000 for most homes, with the job typically finished in 3-5 working days. We remove your existing tub, adjust or relocate plumbing as needed, install a waterproof shower pan and surround, then finish with your chosen fixtures and glass enclosure. Call (855) 951-4361 and a live person will walk you through what’s involved for your specific bathroom and schedule a free on-site estimate.
How We Handle Tub-to-Shower Conversion Start to Finish
We’ve done enough of these in Henderson’s Green Valley and Anthem subdivisions to know where the surprises hide. Here’s how we stage the work so you’re never guessing what’s happening next.
Day 1: Demo and discovery. We strip out the tub, surround, and existing valve. With Henderson’s slab-on-grade construction, we immediately verify whether your drain location can stay put or needs to move. Moving a drain means cutting concrete, and we’ll know within the first hour whether that’s in scope. You decide now: keep the same footprint or reconfigure it?
Day 1-2: Rough plumbing and substrate prep. Our plumber sets the new shower valve height, tests pressure and drainage, and preps the floor for the pan. If we’re cutting concrete for a drain relocation, this is when it happens. The caliche hardpan under many Henderson lots doesn’t change this job directly, but it reminds us why we never assume slab work will go quickly. We allow a half-day buffer on any concrete cutting.
Day 2-3: Pan installation and waterproofing. We set the shower pan (acrylic, composite, or tiled, depending on your spec) and run waterproofing up the walls to 72 inches minimum. In Henderson’s dry climate, we don’t worry about humidity slowing cure times, but we do watch for rapid drying that can stress sealants. We use modified thinset and premium waterproofing membranes that handle thermal cycling without cracking.
Day 3-4: Wall surround or tile, fixture set. Acrylic or fiberglass surrounds go up fast. Custom tile takes longer, and grout cure time adds a day. Your fixture choices get installed now, and we pressure-test everything before closing walls. If you picked a handheld wand, niche shelving, or grab bars, we confirm blocking and placement.
Day 4-5: Glass, trim, final inspection. Frameless glass gets templated and installed. We clean, caulk, and walk the job with you. For Henderson permits requiring inspection, we coordinate the final sign-off. Most of our tub-to-shower conversions in 89052 and 89044 pass on the first visit because we know what the city inspector looks for on shower pan flood tests and venting.
The Choices You’ll Actually Make on a Tub-to-Shower Conversion
Every decision below moves your price and your daily experience. We lay out the honest trade-offs so you’re not upgrading blindly or cheaping out on the wrong thing.
- Shower pan material: Acrylic pans ($, one-day install, 10-15 year life) work fine for guest baths. Composite solid-surface pans ($$, better feel underfoot, 20+ years) suit master baths you use daily. Custom tile pans ($$$, any shape, highest maintenance) look best but need regrouting every few years in Henderson’s hard water.
- Wall surround vs. tile: Acrylic or fiberglass surrounds install in hours, cost less, and never need regrouting. They’re the practical choice for rentals or quick turnovers. Tile gives you design range and higher resale appeal, but the grout lines collect mineral buildup from Southern Nevada’s exceptionally hard water. If you choose tile, we spec epoxy grout as standard.
- Plumbing configuration: Keeping your existing drain and valve locations saves $800-$2,000. Moving either means concrete cutting, permit amendments, and usually a day added. We only recommend relocation when the existing layout is genuinely awkward.
- Glass enclosure: Framed sliding doors are economical and tight-sealing. Frameless hinged panels look cleaner but cost 40-60% more and need precise wall plumbness. In older Henderson tract homes with slightly out-of-plumb framing, framed often fits better with less modification.
- Fixtures and features: Pressure-balancing valves are code minimum; thermostatic valves ($200-$400 upgrade) hold temperature when someone flushes elsewhere. Built-in niches, bench seats, and grab bars add cost but transform usability. We rough blocking for future grab bars even if you skip them now.
What Tub-to-Shower Conversion Costs in Henderson, NV
| Component | Typical Range |
|---|---|
| Basic tub-to-shower conversion (acrylic pan, surround, standard fixtures) | $3,500-$5,500 |
| Mid-range conversion (composite pan, tile walls, upgraded glass) | $5,500-$7,500 |
| Full custom conversion (relocated plumbing, tile pan, frameless glass, thermostatic valve, niche/bench) | $7,500-$10,000 |
| Concrete cutting for drain relocation (if needed) | $800-$2,000 |
| Permit and inspection fees (Henderson building department) | $150-$400 |
Five factors push you toward the high or low end of that $3,500-$10,000 range. First, size: a standard 60-by-30-inch tub bay converts straightforwardly; expanding to a 48-inch walk-in or relocating walls adds labor and materials. Second, existing condition: tubs installed during Henderson’s 1990s-2000s building boom often have galvanized or early copper plumbing at end-of-life; replacing failing supply lines while walls are open is smart but not free. Third, plumbing and structure: any drain or vent relocation triggers concrete work and permit revisions. Fourth, material grade: the jump from acrylic to tile walls alone can add $1,500-$3,000. Fifth, permit scope: Henderson’s building department requires permits for any plumbing modification; we handle submission and inspection scheduling, but the fee and timeline are fixed by the city.
Our written estimate includes demolition, disposal, all plumbing rough and finish, pan and wall materials, fixtures, glass enclosure, permit fees, and final inspection coordination. It does not include bathroom flooring replacement outside the wet area, electrical work beyond a basic exhaust fan, or vanity modifications. If your project is part of a full Bathroom Remodeling in Henderson, we bundle pricing across all trades.
What Henderson Homes Specifically Do to This Job
Henderson’s concentrated wave of 20-30 year old tract homes creates a predictable pattern we see nowhere else in the valley. In Green Valley, Anthem, and Seven Hills, you’re likely looking at a fiberglass tub-and-surround combo installed during original construction, often with a single-handle pressure valve and a drain centered 12 inches from the back wall. The slab-on-grade foundation means no basement access, so every plumbing change is a concrete decision. We’ve converted dozens of these identical bathrooms, and we know which floor plans in which subdivisions have the drain in a spot that won’t work for a modern curbless entry without cutting.
The HOA layer matters too. Anthem and Seven Hills architectural review boards require pre-approval of any visible exterior change, but they’ll also flag bathroom modifications that affect window placement or exterior venting. We submit ARB packets as part of our standard pre-construction package when we know the community requires it. Henderson’s building department runs its own inspection queue separate from Clark County, and shower pan flood tests typically schedule 2-3 days out. We factor that into our timeline so you’re not sitting with an open bathroom waiting for a green tag.
Hard water is the silent cost driver. Henderson’s municipal supply runs 280-350 ppm hardness, among the highest in the nation. Unsealed grout stains within months. Cheap chrome fixtures develop scale that voids manufacturer warranties. We spec Kohler and Moen valves with ceramic disc cartridges rated for hard water, and we recommend epoxy grout or fully sealed wall systems for anyone planning to stay in the home more than five years.
Serving Henderson, NV - Our Local Coverage Area
We’re based in the Henderson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Tub-to-Shower Conversion in Henderson
Most conversions finish in 3-5 working days, with permit inspections adding a potential sixth day depending on Henderson building department scheduling. Call (855) 951-4361 for a timeline based on your specific bathroom layout and whether drain relocation is needed.
Yes, if any plumbing is modified, which includes nearly every conversion. Henderson requires a plumbing permit and final inspection for drain or valve relocation; we submit, schedule, and meet the inspector as part of our standard process. The permit fee typically runs $150-$400.
Often yes, if your existing drain location works with the shower pan size you want and the valve height is acceptable. We verify this during our free on-site estimate; keeping existing locations saves $800-$2,000 and a day of concrete work. Call (855) 951-4361 and we’ll measure on the spot.
Yes, significantly. A tub-to-shower conversion in Henderson runs $3,500-$10,000, while a Bathroom Remodeling project including vanity, flooring, and full reconfiguration starts at $9,000. If your tub is the only element you want changed, conversion is the targeted, cost-effective route.
Every conversion we complete in Henderson is backed by our 730-Day Done Right Promise. If it’s not done right, we make it right. Manufacturer warranties on pans, valves, and glass apply separately and range from 10 years to lifetime depending on the product tier you select.
Ready to Replace Your Tub with a Shower? Let’s Talk.
Call (855) 951-4361 and a live person will answer, 24/7. We’ll schedule a free on-site estimate at your Henderson home, measure your existing space, confirm whether your drain can stay put, and deliver upfront pricing with no surprises. Most tub-to-shower conversions are finished in under a week. Homeowners undertaking broader exterior updates often pair this with Metal Roofing in Henderson or Tile Roofing in Henderson to consolidate project timing and our crew’s presence on-site.
Written by Todd Mervyn, Owner at Groundwork Construction Co., serving Henderson since 2014.